CHIPTUNING
Mercedes-Benz
Sprinter
208/308/408 CDI 82hp
| Default | Upgrade | Difference | |
|---|---|---|---|
| Power Hp | 82 Hp | 145 Hp | + 63 Hp |
| Torque Nm | 200 Nm | 330 Nm | + 130 Nm |
| Power kW | 60 kW | 107 kW | + 47 kW |
Actual delivery time: Within 1 hour
Engine specifications
| Type of fuel | diesel | Compression ratio | 18.0 : 1 |
| Cylinder content | 2148 | Bore x Stroke | 88,0 X 83,0 mm |
| Engine ECU | Bosch EDC15C6 | Engine number | OM 611 |
Suitable tools for this model
Additional tuning features
You can customize your tuningfile with these additional tuning features
EGR OFF
The EGR (Exhaust Gas Recirculation valve) is a valve that returns exhaust gas to the engines cylinders to reduce NOx emissions. The EGR valve can cause contamination in the engine block and will therefore sometimes be closed and disabled by software. Switching off the EGR valve is prohibited in the Netherlands.
DTC Removal
DTCs are also known as Diagnostic Trouble Codes. They are electronic messages in case of problems with the engine or transmission. They can be turned off when the causes are found and resolved.
FLAPS
FLAPS are small valves that vary the length/volume in the intake manifold to get a finer clutch and more efficiency. It is possible to remove or disable the flaps in the engine management system. Sometimes the valves break and when they do, there is a bigger chance of damaging the engine.
Vmax
Many cars have a Vmax, in other words: a speed limiter. It is possible to remove the Vmax from the car in order to experience the full potential of the car.
Adblue
AdBlue is a system that converts harmful NOx in diesel fuel exhaust into harmless nitrogen and water vapor. This significantly reduces emissions of nitrogen oxides (NOx). Adblue can also be disabled in the engine management system.
Engine Chiptuning for Sprinter 208/308/408 CDI 82hp
My Chiptuning files specialise in Chiptuning petrol and diesel engines for improved performance and fuel efficiency. We have years of experience tuning Mercedes-Benz engines to optimise for performance and efficiency.
The process
We analyse your vehicle and can adjust the engine management programme, also known as the ECU (Engine Control Unit). This engine software is largely responsible for the behaviour of the Sprinter 208/308/408 CDI 82hp engine and its fuel consumption. We can optimise the ECU for any car, van, truck or tractor.
The benefits
In the case of the Sprinter 208/308/408 CDI 82hp engine, our Chiptuning file is tailored for more power and torque, reduced fuel consumption, smoother acceleration and improved throttle response. By optimising the torque curve the Sprinter 208/308/408 CDI 82hp engine produces more torque at lower RPM. This also means that you can change gear earlier, so your Mercedes-Benz engine will run at lower revs and therefore more efficiently.
Many engine Chiptuning companies all over the world choose My Chiptuning files to tune their Mercedes-Benz engine. Our Sprinter 208/308/408 CDI 82hp engine Chiptuning file provides the best possible performance and results within the original safety margins.
About MyChiptuningfiles
We supply custom-made ECU tuning files for petrol and diesel engines. We do this in a reliable, affordable, effective and efficient way. Our tuning files are extensively tested to ensure that all our files are provided with the best quality and security. There's a reason why 95% of our tuning files are dyno-tested on our own dynamometer. With our chiptuning files, we provide the answer to the increasing need for optimization of engine technology. Our chiptuning files provide improved power and more economical fuel consumption for all petrol and diesel engines. This guarantees better performances, more torque at lower speed and most importantly: more driving pleasure!
Read more
1
Choose tuning
Select your car and choose your tuning.
2
Buy your files
Complete the buying process and purchase your file.
3
Upload file
Upload your original file.
4
Download file
Download your optimized file within one hour.
