Why choose MyChipTuningfiles
- 100% custom made tuning file guarantee;
- Tested and developed on a Maha testbench;
- Best possible performance and results, within the safety margins;
- Decrease of fuel consumption.
Skoda Roomster
1.4i 16v 86hp
Power Hp
|
86 Hp |
96 Hp |
+ 10 Hp |
Torque Nm
|
132 Nm |
145 Nm
|
+ 13 Nm
|
Power kW
|
63 kW |
71 kW
|
+ 8 kW
|
Power Hp
|
86 Hp |
Processing
|
Processing
|
Torque Nm
|
132 Nm |
Processing
|
Processing
|
Power kW
|
63 kW |
Processing
|
Processing
|
Engine specifications
Type of fuel |
gasoline |
Compression ratio |
10.5 : 1 |
Cylinder content |
1390 |
Bore x Stroke |
76,5 X 86,9 mm |
Engine ECU |
Marelli IAW4HV |
Engine number |
BXW |
Additional tuning features
You can customize your tuningfile with these additional tuning features
![](https://mychiptuningfiles.com/images/options/dtc-removal.svg?rev=1)
DTC Removal
DTCs are also known as Diagnostic Trouble Codes. They are electronic messages in case of problems with the engine or transmission. They can be turned off when the causes are found and resolved.
![](https://mychiptuningfiles.com/images/options/flaps.svg?rev=1)
FLAPS
FLAPS are small valves that vary the length/volume in the intake manifold to get a finer clutch and more efficiency. It is possible to remove or disable the flaps in the engine management system. Sometimes the valves break and when they do, there is a bigger chance of damaging the engine.
![](https://mychiptuningfiles.com/images/options/vmax.svg?rev=1)
Vmax
Many cars have a Vmax, in other words: a speed limiter. It is possible to remove the Vmax from the car in order to experience the full potential of the car.
![](https://mychiptuningfiles.com/images/options/pop-bang-crackle-map.svg?rev=1)
Pop & Bang Crackle map
Programming the Pop & Bang Crackle map.
![](https://mychiptuningfiles.com/images/options/decat.svg?rev=1)
DECAT
Disabling the catalytic converter and removing related DTCs.
![](https://mychiptuningfiles.com/images/options/startstop-off.svg?rev=1)
START/STOP OFF
Disabling the Start & Stop system. Always provide the error codes if they are present in the ECU.
Engine Chiptuning for Roomster 1.4i 16v 86hp
My Chiptuning files specialise in Chiptuning petrol and diesel engines for improved performance and fuel efficiency. We have years of experience tuning Skoda engines to optimise for performance and efficiency.
The process
We analyse your vehicle and can adjust the engine management programme, also known as the ECU (Engine Control Unit). This engine software is largely responsible for the behaviour of the Roomster 1.4i 16v 86hp engine and its fuel consumption. We can optimise the ECU for any car, van, truck or tractor.
The benefits
In the case of the Roomster 1.4i 16v 86hp engine, our Chiptuning file is tailored for more power and torque, reduced fuel consumption, smoother acceleration and improved throttle response. By optimising the torque curve the Roomster 1.4i 16v 86hp engine produces more torque at lower RPM. This also means that you can change gear earlier, so your Skoda engine will run at lower revs and therefore more efficiently.
Many engine Chiptuning companies all over the world choose My Chiptuning files to tune their Skoda engine. Our Roomster 1.4i 16v 86hp engine Chiptuning file provides the best possible performance and results within the original safety margins.