Why choose MyChipTuningfiles
- 100% custom made tuning file guarantee;
- Tested and developed on a Maha testbench;
- Best possible performance and results, within the safety margins;
- Decrease of fuel consumption.
BMW 8 serie
840d 320hp
Power Hp
|
320 Hp |
400 Hp |
+ 80 Hp |
Torque Nm
|
680 Nm |
800 Nm
|
+ 120 Nm
|
Power kW
|
235 kW |
294 kW
|
+ 59 kW
|
Power Hp
|
320 Hp |
Processing
|
Processing
|
Torque Nm
|
680 Nm |
Processing
|
Processing
|
Power kW
|
235 kW |
Processing
|
Processing
|
Engine specifications
Type of fuel |
diesel |
Compression ratio |
16.5 : 1 |
Cylinder content |
2993 |
Bore x Stroke |
84.0 X 90.0 mm |
Engine ECU |
Bosch MD1 |
Engine number |
B57D30 |
Additional tuning features
You can customize your tuningfile with these additional tuning features
EGR OFF
The EGR (Exhaust Gas Recirculation valve) is a valve that returns exhaust gas to the engines cylinders to reduce NOx emissions. The EGR valve can cause contamination in the engine block and will therefore sometimes be closed and disabled by software. Switching off the EGR valve is prohibited in the Netherlands.
DPF OFF
DPF stands for Diesel Particulate Filter and it filters soot particles and dust particles. The filter is designed to make diesel vehicles less harmful to the environment. A DPF is an expensive component and can generate diagnostic error codes and cost a lot of extra fuel. A DPF can be removed or disabled.
DTC Removal
DTCs are also known as Diagnostic Trouble Codes. They are electronic messages in case of problems with the engine or transmission. They can be turned off when the causes are found and resolved.
FLAPS
FLAPS are small valves that vary the length/volume in the intake manifold to get a finer clutch and more efficiency. It is possible to remove or disable the flaps in the engine management system. Sometimes the valves break and when they do, there is a bigger chance of damaging the engine.
Vmax
Many cars have a Vmax, in other words: a speed limiter. It is possible to remove the Vmax from the car in order to experience the full potential of the car.
DECAT
Disabling the catalytic converter and removing related DTCs.
START/STOP OFF
Disabling the Start & Stop system. Always provide the error codes if they are present in the ECU.
Engine Chiptuning for 840d 320hp
My Chiptuning files specialise in Chiptuning petrol and diesel engines for improved performance and fuel efficiency. We have years of experience tuning BMW engines to optimise for performance and efficiency.
The process
We analyse your vehicle and can adjust the engine management programme, also known as the ECU (Engine Control Unit). This engine software is largely responsible for the behaviour of the 840d 320hp engine and its fuel consumption. We can optimise the ECU for any car, van, truck or tractor.
The benefits
In the case of the 840d 320hp engine, our Chiptuning file is tailored for more power and torque, reduced fuel consumption, smoother acceleration and improved throttle response. By optimising the torque curve the 840d 320hp engine produces more torque at lower RPM. This also means that you can change gear earlier, so your BMW engine will run at lower revs and therefore more efficiently.
Many engine Chiptuning companies all over the world choose My Chiptuning files to tune their BMW engine. Our 840d 320hp engine Chiptuning file provides the best possible performance and results within the original safety margins.