为什么选择我们的ECU升级程序网(MyChipTuningfiles)
- 100%定制的升级程序保证;
- 通过Maha测试台的测试和开发;
- 安全限值内实现最佳性能和结果;
- 降低燃油消耗.
BMW X4 M
3.0 xDrive Steptronic Competition 510hp
权力 Hp
|
510 Hp |
575 Hp |
+ 65 Hp |
扭矩 Nm
|
600 Nm |
720 Nm
|
+ 120 Nm
|
功率 kW
|
375 kW |
423 kW
|
+ 48 kW
|
权力 Hp
|
510 Hp |
开发中
|
开发中
|
扭矩 Nm
|
600 Nm |
开发中
|
开发中
|
功率 kW
|
375 kW |
开发中
|
开发中
|
发动机规格
燃料类型" |
gasoline |
压缩比 |
9.3 : 1 |
圆筒内容 |
2993 |
孔径x行程 |
84.0 X 90.0 mm |
发动机ECU |
Bosch MG1CS024 |
发动机编号 |
S58B30 |
附加調優功能
您可以使用這些額外的調整功能自定義您的調整文件
DTC Removal
DTCs are also known as Diagnostic Trouble Codes. They are electronic messages in case of problems with the engine or transmission. They can be turned off when the causes are found and resolved.
FLAPS
FLAPS are small valves that vary the length/volume in the intake manifold to get a finer clutch and more efficiency. It is possible to remove or disable the flaps in the engine management system. Sometimes the valves break and when they do, there is a bigger chance of damaging the engine.
Vmax
Many cars have a Vmax, in other words: a speed limiter. It is possible to remove the Vmax from the car in order to experience the full potential of the car.
DECAT
Disabling the catalytic converter and removing related DTCs.
START/STOP OFF
Disabling the Start & Stop system. Always provide the error codes if they are present in the ECU.
我们能通过分析您的拖拉机,将您的发动机管理程序调到最佳。发动机管理程序也叫做ECU(发动机控制单元),能让发动机实现更加油耗。发动机软件很大程度上负责BMW 3.0 xDrive Steptronic Competition 510hp 510HP汽车发动机的行为和油耗。My Chiptuningfiles是一款可专为BMW 3.0 xDrive Steptronic Competition 510hp 510HP车辆定制的软件产品。这可以被视为专门基于油耗定制的程序。使用My Chiptuningfiles,您能获得更强的动力、更平滑的扭矩曲线、更低的油耗、更低转速时扭矩更大、以及更佳的油门响应。通过优化BMW 3.0 xDrive Steptronic Competition 510hp 510HP的扭矩曲线,BMW BMW X4 M 510HP发动机能在更低转速下获得更大扭矩和更大的梯度,同时也让您更早获得最佳扭矩。由于您可在更低转速下更早换挡,BMW BMW X4 M 510HP 发动机能在更低转速下行驶,效率更高。