NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp
当前交货时间: 1 小时内

为什么选择我们的ECU升级程序网(MyChipTuningfiles)

  • 100%定制的升级程序保证;
  • 通过Maha测试台的测试和开发;
  • 安全限值内实现最佳性能和结果;
  • 降低燃油消耗.

Nissan NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp

发动机规格

燃料类型" diesel 压缩比 15.4 : 1
圆筒内容 2299 孔径x行程 85,0 X 101,3 mm
发动机ECU Siemens/Continental SID309 发动机编号 YS23DDTT

附加調優功能

您可以使用這些額外的調整功能自定義您的調整文件

EGR OFF
The EGR (Exhaust Gas Recirculation valve) is a valve that returns exhaust gas to the engines cylinders to reduce NOx emissions. The EGR valve can cause contamination in the engine block and will therefore sometimes be closed and disabled by software. Switching off the EGR valve is prohibited in the Netherlands.
DPF OFF
DPF stands for Diesel Particulate Filter and it filters soot particles and dust particles. The filter is designed to make diesel vehicles less harmful to the environment. A DPF is an expensive component and can generate diagnostic error codes and cost a lot of extra fuel. A DPF can be removed or disabled.
DTC Removal
DTCs are also known as Diagnostic Trouble Codes. They are electronic messages in case of problems with the engine or transmission. They can be turned off when the causes are found and resolved.
FLAPS
FLAPS are small valves that vary the length/volume in the intake manifold to get a finer clutch and more efficiency. It is possible to remove or disable the flaps in the engine management system. Sometimes the valves break and when they do, there is a bigger chance of damaging the engine.
Vmax
Many cars have a Vmax, in other words: a speed limiter. It is possible to remove the Vmax from the car in order to experience the full potential of the car.
Adblue
AdBlue is a system that converts harmful NOx in diesel fuel exhaust into harmless nitrogen and water vapor. This significantly reduces emissions of nitrogen oxides (NOx). Adblue can also be disabled in the engine management system.

我们能通过分析您的拖拉机,将您的发动机管理程序调到最佳。发动机管理程序也叫做ECU(发动机控制单元),能让发动机实现更加油耗。发动机软件很大程度上负责Nissan NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp 160HP汽车发动机的行为和油耗。My Chiptuningfiles是一款可专为Nissan NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp 160HP车辆定制的软件产品。这可以被视为专门基于油耗定制的程序。使用My Chiptuningfiles,您能获得更强的动力、更平滑的扭矩曲线、更低的油耗、更低转速时扭矩更大、以及更佳的油门响应。通过优化Nissan NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp 160HP的扭矩曲线,Nissan Nissan NP300 160HP发动机能在更低转速下获得更大扭矩和更大的梯度,同时也让您更早获得最佳扭矩。由于您可在更低转速下更早换挡,Nissan Nissan NP300 160HP 发动机能在更低转速下行驶,效率更高。

关于 MyChiptuningfiles

我们为汽油和柴油发动机提供量身定制的ECU调谐程序。可靠性,经济性,高效率,和高成是我们践行的宗旨。我们的调谐程序都经过广泛测试,以确保所有程序都具有最佳质量表现和最可靠的安全性。这也是我们95%的调谐程序都必须经过我们自己的测功机测试的原因。 通过我们的ECU调校程序,我们解决了日益增长的发动机技术优化需求。我们的ECU调校程序为所有汽油和柴油发动机提供更高的动力和更经济的油耗。这进而保证了发动机更好的性能,低速下更大的扭矩,最重要的是:更多的驾驶乐趣!

阅读更多
1

选择你的调谐器

选择您的汽车并选择您的调谐器。
2

购买你的调谐器

完成购买步骤并购买程序。
3

上传文件

上传您的原始程序文件。
4

下载文件

一小时内即可下载为您优化的程序文件。

芯片调整工具 suitable for Nissan NP300 2.3 DCi Bi-Turbo (Euro 5) 160hp

CMD Flash Slave Full

CMD Flash Slave Full

€ 3.950,00
New Genius SLAVE TOOL

New Genius SLAVE TOOL

€ 500,00
NEW TRASDATA SLAVE TOOL

NEW TRASDATA SLAVE TOOL

€ 600,00
CMDFlash Master Full

CMDFlash Master Full

€ 6.950,00